Power
Connection
Speaker
Connection
Normal Stereo
Connections
The JF2000 is designed to operate on 120 Volts AC, 60 Hertz
standard U.S. line output) only. Connection is via a standard
3-prong grounded AC plug. If a 3-prong (grounded) outlet is
rot available, the third (ground) wire MUST be grounded to
a satisfactory electrical ground using adapters available at
nost hardware stores.
If an extension cord must be used, it will rob power from the
amplifier. Use only the highest qualtiy 3-wire (grounded)
extension cords, with large wire (14-Gauge or larger) to
educe
losses.
Speaker connectors are heavy-duty gold-plated “5-way”
binding posts, spaced for standard banana jack connectors.
They will accept bare stranded wire up to approximately 12-
Gauge. Banana connectors may be more convenient.
For normal stereo operation leave ALL REAR PANEL
SWITCHES IN. The amplifier’s left channel red binding post
connects to the left positive (+) speaker terminal and the left
black post goes to the left negative (-) speaker terminal. Wire
the right channel the same. (Refer to Figure 1)
Figure 1
Left positive (+) terminal (red) to Left Speaker positive (+)
Left negative (-) terminal (black) to Left Speaker negative (-)
Right positive (+) terminal (red) to Right Speaker positive (+)
Right
negative (-) terminal
(black) to Right Speaker negative (-)
3
Summary of Contents for JF2000
Page 1: ......
