1. Before steam cooking:
if the tank is short of water, press button,
level to remind you to add water.
2. During steam cooking:
3. After steam cooking:
Defect codes
Below defect codes may occur during steam functions :
E-06: 1-Water tank is not close well.
E-05: water system abnormal, need to contact for Engineer to check, below is the
possibilities.
1-The water sensor is abnormal.
3-The water pump is abnormal.
16
1-After steam function is finished , the water in boiler will be withdraw to water tank.
2-During the process to withdraw the water back to water tank , if the water tank is
full , the system will be beeping 10 times to remind you clean up the tank. After the
to withdraw water.
2-The water tank is empty, need to inject the water.
2-The water pipe is abnormal.
4-The water tank is abnormal.
Steam note:
Before starting the steam cooking mode,
Lock: In standby mode, press "
denoting entering into the children-lock state and " " indicator will light.
Unlock : In locked mode, press "
"beep" denoting that the lock is released, and " " indicator will disapear.
" for 3 seconds, there will be a long "beep"
" for 3 seconds, there will be a long
9. Lock-out Function for Children
abnormal buzzer will ring and the screen icon will show water scarcity status of water
if the tank is short of water, abnormal buzzer will ring
add water. After adding water, it can work normally.
and the screen icon will show water scarcity status of water level to remind you to
During steam cooking mode,
water tank is empty, the system will continue
about 1 minute.
This process lasts for
