H
D
E
1
0
/2
019
73
2.2
9
.2
10
42
Error messages
If the encoding station has not detected a network – for example, due to a missing
cable or defective network component – an error message is displayed:
Network
disconnected
.
Fig: Error message
6.6 Configuration
for Legic Advant
To configure the encoding station for Legic Advant, the object-specific SAM
transponder is required.
1. Follow the steps described in Chapter 6.2 (Setting the IP address) to log into the
encoding station.
2. Hold the Legic Advant SAM transponder above the encoding station.
3. Click on the “Launch” link on the left-hand side.
4. Then click on the red “Launch” button. If the read-in (launch) was successful,
the following information appears on the display:
Fig: Launch
ins-src-732.29.127.book Seite 42 Mittwoch, 2. Oktober 2019 5:50 17
