Mounting Instructions
39
3. Drill holes at least 6 mm deep in the outer side of the door with
drill bit Ø = 8 mm.
4. Drill holes in the inner side of the door with drill bits Ø = 8 mm or
Ø = 7 mm (depending on the rosettes used).
Attaching the Door Terminal Basic
a
a
Slot of the square spindle
1. Place the fixing plate and bracket on the outer door leaf in such a
way that the retaining pins of the fixing plate are located in the
drilled holes in the door, and the square spindle is sitting in the
lock spindle in such a way that the slot for the set screw is
pointing in the direction of the strike.
2. Ensure that the fixing plate is lying flat on the door leaf.
If the fixing plate is not lying flat:
Ö
Check the drilled holes and if necessary remove wood
shavings.
