Hafele 421.68.440 Mounting Instructions Download Page 2

2

Electrical TV Lift mechanism TS750 

2

Important safety Instructions 

Use the following safety guidelines to help protect your lift from potential damage and 

to ensure your own personal safety. 

  Read all the installation instructions before testing or installing your lift. 

  Read and follow all safety instructions. 

  Keep remote control out of reach of children. 

  To prevent bodily injury keep hands and clothing away from the lift while the 

lift is in operation. 

  Before installing the lift or working with its connections, unplug the lift from the 

electrical shock. 

  Do not install the lift, power supply or R.F. module in places subject to extreme 

temperatures for example near a radiator, or heating vent.

  To avoid damaging the power supply, R.F. module and power cord, do not put 

anything on it or place it where it could become damaged. 

  Unplug the lift in the following conditions: 

  When the power cord or plug is damaged or frayed. 

  If liquid has spilled into the lift, power supply or RF module.  

  If the lift, power supply or RF module has been exposed to rain 

or water.

  If the lift exhibits a distinct change in performance, indicating a 

need for servicing.

CAUTION: Before you begin any of the Installation procedures on page 3, 

read and follow the warnings and safety instructions on this page. 

WARNING ! THIS IS NOT A TOY ! 

WARNING ! CHILDREN SHOULD NOT OPERATE LIFT OR 

REMOTE CONTROL ! 

Summary of Contents for 421.68.440






Reviews: