Bed-lift, Queen-size
Item No.: 271.92.132
Mounting Instructions
Page 1: ...Bed lift Queen size Item No 271 92 132 MountingInstructions ...
Page 2: ...istons cannot be adjusted for weight variations Inside cabinet dimensions must be observed and square before installation of frame See Dia A Toekick heights from 3 3 3 4 75 95 mm and must be beveled approx 45º as in Dia B Bed cabinet must be securely fastened to wall to guard against tipping Use the included safety wall mounting brackets Material steel Color black lacquer Slats wood elm Feet steel...
Page 3: ...me Final attachment is with wood screws through holes in frame Be sure front panel is securely fastened before operation of frame 7 To adjust the position of the front panel in the closed position adjust the nut at the end of the sleeve which holds the gas piston using a 17 mm wrench Also needed is an additional wood strip stop to be added under the top panel to ensure that the bed closes absolute...
Page 4: ...nter sink outside edges Ø 16 5 mm 32 32 32 32 97 64 19 3 3 mm 32 129 75 95 approx 45º Front Panel Bottom Panel Toe Kick Use these two holes to mount brackets to inside of cabinet IMPORTANT This diagram is not to scale It has been reduced You need to transfer the dimensions to the side panels ...
