Height Adjustment
+1.5 -1.5 mm
Depth Adjustment
+2.8 mm
Side Adjustment
-0.5 +5.5 mm
4 Door adjustments
Adjust out any sag in the door using the cable adjuster (E) Do not over tighten cable.
Cable should only have light tension applied.
Make further adjustments using adjusting screws on hinge and mounting plates.
(see diagram)
Test ease of operation by sliding door in and out.
Hinge adjustments
0.7 mm
5.5 mm
-0.5 mm
1.5 mm
1.5 mm
3.5 mm
(E) Cable Adjuster
5 Install Guide Roller
Locate and install guide roller (G) as shown, using
pivot roller screw. (418.09.301, 015.31.675)
(G) Guide Roller
9.5 mm (3/8") from
inside of door
in open position
to center of guide roller.
9.5 mm (3/8") from
inside of door
in closed position
to center of guide
roller.
3901 Cheyenne Drive • Archdale, NC 27263
1-800-423-3531 • www.hafele.com/us
