5
2. Installation (Vent outside):
Attention! Observe the warning in the instruction sheet concerning the operation of the appliance
when air is discharged from the room.
When the range hood and appliance supplied with energy other than electricity are simultaneous-
ly in operation, the negative pressure in the room must be not exceed 4 Pa (4x10
-5
Bar)
•
To install onto the wall drill 2 holes of 8mm on a suitable place according with the centre dis-
tance of hole in the back of the cooker hood.
•
Insert the nut into the holes.
•
Insert the screws into the nuts and tight. Put the cooker hood onto the tighten screws.
•
Fix the cooker hood with safety screw. The two safety vents are positioned on the back casing,
with diameter of 6mm.
•
Put the one way valve onto the cooker hood.
Way one: