3
2. Product Installation
3. Cleaning and Maintenance
1. Rotate counterclockwise (4) to separate (4) (3) from (1);
2. Install (1) and (2) from the installation table from top to bottom;
3. Confirm the expected installation angle of (1), and install (3) (4) on the thread of (1)
Turn (4) clockwise to the fastening position, so that the body group and the installation
table are firmly installed;
4. Install (5) to the water inlet thread of Body Group to the fastening position
5. Lock the inlet water pipe (5) nut clockwise to the thread of the water outlet. Lock
it with a wrench, open the cold and hot water inlet valve, and check that there is no
water leakage at the connection of each thread;
6. Ensure that the hot and cold inlet pipes are properly connected. If standing in front
of the faucet, connect the hot water pipe on the left and the cold water pipe on the
right;
1. Rinse with clean water and dry with a soft cloth
2.
If there is dirt, clean it with soft liquid or clear glass cleaner
3.
Do not use acidic detergent, granular detergent which does not break down easily
or soap
4.
If there is a need, the aerator can be rotated down to be rinsed.
