Häfele T-602C Instruction Manual Download

Page: 4 / 12

working.

4-2. Turn on the power, directly press temperature button to select temperature and

press On/Off button for about 3s to enter working procedures of boiling water
and preserving temperature. The kettle will end heat preservation procedure in
advance and enter sleep mode if you press On/Off button when the heat
preservation mode is working.

4-3. Under boiling mode, you may change boiling temperature (50°C, 70°C, 80°C,

90°C and 100°C).

4-4. Under heat preservation mode, you may change boiling temperature (50°C,

70°C, 80°C, 90°C and 100°C).

4-5. You may press On/Off button any time to stop/start working mode.
4-6. Under standby mode, the kettle exits working state. The lamp at the base of the

kettle is off, and the digital tube displays water temperature.

4-7. Under sleep mode, the kettle exits working state. The lamp at the base of the

kettle is off, and the digital tube displays nothing. Any operation of the kettle
may cause exit of dormant state.

4-8. If the kettle will not be used for a long time, it is suggested to pour water of the

kettle away, so as to avoid generating incrustation.

5. Disposal of Faults

When the display of the digital tube is in disorder, you need to check whether the
temperature sensor of the kettle is loosened and whether the wire is connected
reliably.

When the operation of the kettle is out of control or it makes sound all the

time

, you need to check whether there is any water entering the control panel of the

kettle, or the dry burning protection system may be triggered due to failure of pouring
water inside while starting the kettle or the accumulation of incrustation. Under such
situation, you may cool the kettle for several minutes and then pour cold water inside
and re-press boiling button to set its work.

6. Cleaning and Maintenance
Cleaning of the kettle

-. Plunk out the plug.
-. Clean it with sponge after cooling it.

Attention: Do not soak the kettle, base, power line or plug into water or use
brush to clean them.

Filter screen’s cleaning:
The filter screen cannot dispose or change water quality. When the quality of water is
poor, the filter screen will be blocked soon. Therefore, it is very important to clean
the filter screen regularly. You can take the screen down and wash it below a tap.
Incrustation remove

Using white vinegar: