3
2. P d t Insta ati n
. eaning and Maintenan e
1. otate counterclock ise ( ) to separate ( ) (3) rom (1)
. nstall (1) and ( ) rom the installation table rom top to bottom
3. on irm the e pected installation angle o (1), and install (3) ( ) on the thread o (1)
Turn ( ) clock ise to the astening position, so that the body group and the installation
table are firmly installed;
. nstall (5) to the ater inlet thread o Body roup to the astening position
5. ock the inlet ater pipe (5) nut clock ise to the thread o the ater outlet. ock
it ith a rench, open the cold and hot ater inlet valve, and check that there is no
water leakage at the connection of each thread;
6. Ensure that the hot and cold inlet pipes are properly connected. If standing in front
o the aucet, connect the hot ater pipe on the le t and the cold ater pipe on the
right;
1. Rinse with clean water and dry with a soft cloth
2.
there is dirt, clean it ith so t li uid or clear glass cleaner
3.
Do not use acidic detergent, granular detergent hich does not break do n easily
or soap
4.
there is a need, the aerator can be rotated do n to be rinsed.
