12
OPERATION
Touch control heating elements
Switching the Touch Control on/off
Automatic off
Switching a cooking zone on/off
After mains voltage is applied, the touch control initialises for approximately one second
before it is ready for use.
All displays and LEDs flash for approximately one second after resetting. Once this period
is complete, all displays and LEDs switch off and the touch control is in standby mode.
Press the ON/OFF (1) button to switch the touch control on.
The cooking zone displays indicate “0“. If a cooking zone is in “hot“ (high temperature)
mode, the display will alternately indicate “H“ and “0“.
After switching the touch control on, it will remain active for 20 seconds. If no cooking zone
is selected, the touch control automatically switches back to standby mode.
The touch control can only be switched on by pressing the ON/OFF (1) button.
Pressing the ON/OFF (1) button at the same time as other buttons will have no effect and
the touch control will remain on standby.
The touch control can be switched off at any time using the ON/OFF (1) button. This is even
the case when the control has been locked by the child safety feature.
The ON/OFF (1) button always takes priority in the switching off function.
Touch sensitive keys All operations can be performed using touch sensitive keys (capacitive
sensors) located on the front of the control board; each key has a corresponding display.
All actions are confirmed by an audible signal.
Once switched on, the touch control automatically switches off after 20 seconds of inactiv
-
ity. After selecting a cooking zone, the automatic off time is divided into 10 seconds, after
which the zone is deselected and, after another 10 seconds, the touch control switches off.
If the touch control is switched on, the cooking zone can be selected by pressing the
button (5) of the corresponding zone. The display (6) of the zone selected lights up, while
the remaining displays are dimmed. if the cooking zone is “hot”, “H” and “0” are alternately
displayed. Press the PLUS (3) or MINUS (2) button to select a setting and the zone will
begin to heat up. Once the cooking zone has been selected, the setting can be selected
by keeping the PLUS (3) button pressed down. The setting begins at level 1 and increases
by 1 level every 0.4 seconds. When setting “9” is reached, the setting will not be changed
further. If the setting level has been selected using the MINUS (2) button, the start level is