Häfele HDW-FI60D, User Manual

Page: 27 / 64

EN24
FAULT POSSIBLE CAUSE TROUBLESHOOTING
Whitish stains
remains on dishes.
Not enough detergent
used
Use the correct amount of detergent, as
instructed in the programme table.
Rinse aid dosage and/or
water softener setting set
too low.
Increase rinse aid and/or water softener
level.
High water hardness level
Increase water softerner level and add
salt.
Salt compartment cap not
closed properly.
Check that the salt compartment cap is
closed properly.
Dishes do not dry.
Drying option is not
selected.
Select a programme with a drying
option.
Rinse aid dosage set too
low.
Increase rinse aid dosage setting.
Rust stains form on
the dishes.
Stainless-steel quality of the
dishes is insufficient.
Use only dishwasher-proof sets.
High level of salt in wash
water.
Adjust the water hardness level using
water hardness table.
Salt compartment cap not
closed properly.
Check that the salt compartment cap is
closed properly.
Too much salt spilled in the
Dishwasher while filling it
with salt.
Use funnel while filling salt to the com-
partment to avoid spillage.
A poor mains grounding.
Consult a qualified electrician
immediately
Detergent remains
in the detergent
compartment.
Detergent was added
when the detergent
compartment was wet.
Make sure detergent compartment is dry
before use.