4
INSTALLATION
Selection of Installation Equipment
Cut out the work surface according to the sizes shown in the drawing.
For the purpose of installation and use, a minimum of 50mm space shall
be preserved around the hole. Be sure the thickness of the work surface
is at least 30mm. Please select heatresistant work surface material to
avoid larger deformation caused by the heat radiation from the hotplate.
As shown below:
The hob can be used on the table top of cabinet. The ceramic hob
should be placed horizontally. As shown below:
NOTE
The safety distance between the hotplate and the cupboard above
the hotplate should be at least 760mm.
Under any circumstances, make sure the hob is well ventilated
and the air inlet and outlet are not blocked. Ensure the hob is in good
work state. As shown below
!!
!!
