CLEVER
ASSEMBLY INSTRUCTIONS
0000.2299-A
WARNING!
Slide the column into the beam. Column and Beam need to be installed perpendicular to
each other
–
failure to do so may result in undesired noise during use. Make sure to align the male hex (located at the
end of the column) with the female hex (located inside of the motor housing inside of the Beam). Use a 9mm wrench
to turn the hex adapter on the column to align with the hex in the motor. Failing to do so will damage the motor! (Do not
try to turn the motor!)
Step 1 - Insert Clever Column into Cross Beam and slide Top Supports over the width of the Beam. (Fig. 1)
Step2 - Attach the Top Supports to the Clever Column using the M8x12mm Button Head Screws provided.
Torque screws to 24 N m (18 ft lb). (Fig. 2)
(Fig. 1)
(Fig. 2)
Or
