732.28.436
HDE 23.06.22
9
5. Provisioning
5.1 Adding Connect Mesh Boxes
For adding boxes press at Connect Mesh Remote Eco the channel buttons 3 and 4 of the
Connect Mesh Remote Eco simultaneously for 4 seconds.
[Image 9] Connect Mesh Remote Eco, Adding Boxes
The Connect Mesh Remote Eco status LED blinks slowly to indicate the running scan for addable
mesh devices. The Connect Mesh Box you would like to add to your network has to be in
Provisioning Mode (Status LED blinking). After the remote finds a device in provisioning mode,
the status LED of the Connect Mesh Remote Eco starts to flash faster to indicate the current
steps of the provisioning process.
During process the Connect Mesh Box starts to double blink. Now you have to assign the box to
the channel you would like to set.
After the found Connect Mesh Box was added successfully (Status LED Mesh Box constant on),
the Connect Mesh Remote control restarts scanning for the next device to add (status LED blinks
slowly).
To finish the process, please press any button on the control wheel
5.2 Creation of a new network (after complete reset of all devices)
Refer to the same process like “adding Connect Mesh boxes” in chapter 5.1.
Press both for 4 seconds
