Häfele 535.43.531, Instruction Manual

Page: 6 / 18

Button “ON”
：
Press it, product began to work. If you
want to stop, press Button “REV”, Make the switch back to
the "OFF" position.
Button “REV”
：
Press it and hold, when it slag and stall.
Screw began to reverse. Release the button and press
Button “ON”, it go back to normal work.
7
．
Wash the ingredients and cut into the inlet size, put them on the tray
·Cut the spinach into small pieces before squeezing, and proper control the
feed rate
·Remove the nucleus,hard seeds, thick or crust of the ingredients before
squeezing
·Choose the appropriate ingredients
，
see "Chapter III How to use" Section
Two
8
．
Put the ingredients into the feed inlet, push them with pusher.
·Open the button up, when squeeze apples or ingredients bigger than feed
inlet, than
put the ingredients into the feed inlet and flip into juice container
·Shut down the button, and lock swivel bracket when squeeze small volume
of fruits such as
tomatoes, small orange, peeled pomegranate etc., then put the ingredients
into feed inlet.
9
．
Press Button“ON/OFF”when food is processed and no more juice flow out.
After the
motor and screw stop completely, take the juice cup away from juice mouth and
slag door
·Juice mouth can adjust the quantity of juice with pull-out and easy to clean
·Fresh fruit juice is recommended to drink as soon as possible, exposed to
the air a
long time, taste and nutritional value will be affected.
Chapter Four : Maintenance
1.Close the "Switch" and power off before cleaning
2.Cleaning the machine timely after use
3. Do not put the product into water or other liquid. Or washed by water or other
liquid.
4. It should be keep in a dry place and avoid the sunshine
5. Make sure the machine is clean and dry before using
6. Refer the following dismounting steps before clean
Chapter Five: Safety Index
Input Voltage
220-240V
～
Power 250W
Frequency 50Hz
Continuous
working period
≤20 Min
Spacing interval
≥5 Min