Häfele 535.43.271, Instruction Manual

Page: 6 / 22

3.Function selection
Function button is divided into 3 kinds: one-button function button, speed
selection button, and pulse button;
One-button function
；
After the machine enters into the function selection mode, and select the
corresponding one-button function button
，
the machine will work to the end
intelligently and quickly (When press this button during the working, the
machine will stop working, and then continue to work if press the button
again). At the end, the machine will automatically return to the function
selection mode;
Whole juice
：
the machine start to work by low speed. After 3 seconds, the
speed gradually increased to high speed mode and working for 5 seconds,
then stopped for 2 seconds. The machine restart to work another 8 seconds
and then stop for 2 seconds. After 6 cycle and another 20 seconds, the
machine will stopped.(During the working period, the countdown will started
from the last 90 seconds.)
Smoothie : the motor starts to work and step up to the high speed gradually
within 5 seconds and then stop 2 seconds after having worked for 8 seconds.
The machine will stop working after 5 cycles.
Speed selection;
（
-
、
+
）
Press “
high speed
” button: this button has two work modes: A
、
the motor
starts to run and step up to the high speed gradually within 5 seconds and
then stop working after having worked continuously for 3 minutes; B
、
During
the process of work, after pressing “low speed” button, and long press this
button for 3 seconds, the motor’s speed will slow down to the lowest gear one
by one per 2 seconds under the condition of the current speed and then stop
slowing down, (buzzer will ring once when speed gear slows down). If the
button is stopped in the middle, the working mode will be transferred to A
mode.
Pulse
（ ）
Under the mode of function selection, tap the " " to activate, and then long
press " ", the machine begins to work within 5 seconds; the machine will
stop working after loosing the button and then return to the activation mode.
The continuous working time of the machine is set up to 60 seconds.
After the machine enters into the function selection mode, press " low speed "
button: this button has two work modes: A
、
the motor starts to run and within
3 seconds, the motor can step up to the low speed gradually, and the motor
will stop working after continuously working 3 minutes later; B
、
During the
process of work, after pressing "high speed" button, and then long press the
button for 3 seconds, the motor’s speed will step up to the top gear one by
one per 2 seconds under the condition of the current speed and then stop
accelerating, (buzzer will ring once when speed gear is accelerated). If the
button is stopped in the middle, the working mode will be transferred to A
mode.