SLIM MODEL INSTALLATION
Way 1:
To install onto the wall drill 2 holes of Ø8mm on a suitable place according with the
centre distance of hole in the back of the cooker hood.
Insert the nut into the holes.
Insert the screws into the nuts and tight. Put the cooker hood onto the tighten screws.
Fix the cooker hood with safety screw. The two safety vents are positioned on the back
casing, with diameter of 6mm.
Put the one-way-valve onto the cooker hood.
Way 2:
Drill 4 holes of 6mm diameter at the bottom of the hanging cupboard.
Put the one-way-valve on the cooker hood, then install the cooker hood on the bottom
of the hanging cupboard, tighten the hood with enclosed 4 screws.
Summary of Contents for 495.38.283
Page 8: ...8 ...
