Manager:
Milling Mac
hine
LOW
CRUSHING
Authorised and signed by:
O
OTHER HAZARDS, NOISE.
LOW
W
ear hearing protection as required.
Developed in Co-operation Between
A.W
.I.S.A
and
Australia Chamber of Manufactures
This program is based upon the Safe W
ork
Australia, Code of Practice - Managing Risks of Plant in the W
orkplace ( WHSA
201
1 No10 )
M
NEW
MACHINER
Y
HAZARD IDENTIFICA
TION,
ASSESSMENT & CONTROL
PUNCTURING
Do not adjust or clean machine until the machine has fully stopped.
F
STRIKING
Safety of
ficer:
Remove all loose objects around moving parts.
Machine should be installed & checked by a Licensed Electrician.
PLANT SAFETY
PROGRAM
No.
Hazard
Identification
Item
Hazard
Assessment
D
B
ENT
ANGLEMENT
CRUSHING
H
SHEARING
A
B
HIGH
Risk Control Strategies
(Recommended for Purchase / Buyer / User)
Secure & support workpiece on mill table.
MEDIUM
Eliminate, avoid loose clothing / Long hair etc.
Incorrect adjustment may result in the head becoming detatched and a crushing hazard
Mill head tilting adjustment - please refer to mill head tilting instruction sheet for correct procedure.
Make sure all guards are secured shut when machine is on.
HIGH
MEDIUM
Ensure correct spindle direction when milling.
Ensure tooling is secure in chuck.
Stand clear of moving parts on machine.
MEDIUM
ELECTRICAL
W
ear safety glasses.
HIGH
TEMPERA
TURE
LOW
All electrical enclosures should only be opened with a tool that is not to be kept with the machine.
W
ear appropriate protective clothing to prevent hot swarf.
Isolate power to machine prior to any checks or maintenance.
Revised Date:
www
.machineryhouse.com.au
www
.machineryhouse.co.nz
12th March 2012
C
CUTTING, ST
ABBING,
MEDIUM
Isolate power to machine prior to any checks or maintenance being carried out.
Plant Safety Program to be read in conjunction with manufactures instructions
