Hafco L108, Instruction Manual

Page: 5 / 15

Manager:
Hazard
Linisher-Disc Sander
D
MEDIUM
CUTTING, ST
ABBING,
Authorised and signed by:
NEW
MACHINER
Y
HAZARD IDENTIFICA
TION,
ASSESSMENT & CONTROL
STRIKING
MEDIUM
W
ear appropriate protective clothing.
Item
C
Safety of
ficer:
O
Must be connected to a dust extraction.
PLANT SAFETY
PROGRAM
No.
Hazard
Identification
Developed in Co-operation Between
A.W
.I.S.A
and
Australia Chamber of Manufactures
This program is based upon the Safe W
ork
Australia, Code of Practice - Managing Risks of Plant in the W
orkplace ( WHSA
201
1 No10 )
Assessment
MEDIUM
H
OTHER HAZARDS, NOISE,
ELECTRICAL
F
ENT
ANGLEMENT
PUNCTURING
SHEARING
Do not adjust or clean machine until the machine has fully stopped.
A
HIGH
Risk Control Strategies
(Recommended for Purchase / Buyer / User)
Isolate power to machine prior to any checks or maintenance being carried out. Eliminate, avoid loose clothing / Long hair etc. Make sure all guard are secured shut when machine is on. W
ear safety glasses.
Always keep gap between table and disc to a minimum.
DUST
.
MEDIUM
Remove all loose objects around moving parts. Always sand on the down stroke of the disc's rotation.
LOW
E
FRICTION
MEDIUM
Keep hands and body clear from sanding disc/belt.
Plant Safety Program to be read in conjunction with manufactures instructions
Ensure belts are in good condition and at correct tension. Stand clear of moving parts on machine. All electrical enclosures should only be opened with a tool that is not to be kept with the machine. W
ear hearing protection as required.
Revised Date:
www
.machineryhouse.com.au
www
.machineryhouse.co.nz
12th March 2012
Page 5 Instructions Manual for L-612 (L108) 04/08/2017