English
Instructions for use
3
Assembly instructions
1.
Put the rubber sealing ring (4) on the inner edge of the blade unit (5).
2.
Put the blade unit with sealing ring into the cup base (6).
3.
Mount the glass cup (3) onto the cup base unit and tune the cup base unit,
in clockwise direction until it is fixed.
4.
Mount the glass jar with cup base on the base unit.
5.
After putting the ingredients in the jug, fix the lid (2) on the jug by pressing
down.
6.
Insert the inner cover (1) into the opening of the lid and tune it in
anticlockwise direction until it is locked.
Putting into Service
Electrical Connection
1.
Connect the device to a duly installed 220-240V~ 50Hz with protective
contact socket.
2.
Before inserting the plug into the socket. Make sure that the mains voltage
to be used matches that of the device. You can find this information on the
nameplate.
Operation
•
This appliance has been designed to blend liquids such as dairy products,
sauces, fruit juices, soups; to mix drinks, shakes, etc. It can be used to mix soft
foods or to make purées with cooked ingredients, such as carrots or baby
food ingredients. You can also use the blender to make cocktails with
crushed ice. Never put in more than 10 ice cubes at a time.
•
Under no circumstance should the appliance be operated for more time
than what is necessary. After using the appliance continuously for one
minute, allow it to cool to room temperature to prevent it from overheating.
You can use it again after 10 minutes.
•
Do not put any wooden, plastic, glass, metal or similar objects in the jar.
1.
Assemble the blender as explained in section “Assembly
Instructions
”. Be
sure that it is assembled correctly.
2.
Put food into the jar without exceeding 2/3 of the maximum capacity
(upper edge).
3.
Put on the lid and press and the cap. Be sure that they are on correctly.
4.
Plug in the power cord.
