HAEGER North Pole 220, User Instructions

Page: 16 / 68

English
10
Reverse the door (E)
Tool required: Phillips screwdriver, flathead screwdriver, and an adjustable wrench or
spanner.
•
Ensure the unit is unplugged and empty.
•
To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on
something solid so that it will not slip during the door reversing process.
•
All parts removed must be saved to do the reinstallation of the door.
•
Do not lay the unit flat as this may damage the coolant system.
•
It' s better that 2 people handle the unit during assembly.
Follow the images on section E – Reverting door
1. Carefully remove the top hinge cover with a flat screw driver.
2. Unscrew the top hinge with a Philips screw driver.
3. Remove the hole cover with a flat screw driver.
4. Move the core cover from left side to right side. And then lift the upper door and place it on
a padded surface to prevent it from scratching.
5. Unscrew the middle hinge and then lift the bottom door and put it on a soft pad to avoid
scratch.
6. Move two middle hole covers from left to right.
7. Lie down the rear of cabinet on a soft pad. And unscrew the bottom hinge and levelling foot.
8. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.
9. Install the hinge at left side and foot base at right side. Then screw two levelling feet with
their original parts.
10. Move two middle hole covers from left to right.
11. Stand up the unit and put the door on the bottom hinge. Make sure the bottom hinge core
is inserted in the door hole. Then move the hinge hole cover of bottom door from left side
to right side.
12. Install the middle hinge.
13. Install the upper door with the upper hinge.
14. Clap in the hinge cover and hole cover on the top of unit.
15. Detach the Fridge and the Freezer door gaskets and then attach them after rotating.
Practical advice for saving energy
•
Install the refrigerator in a cool, well-ventilated place, protected against direct sunlight and
well away from heat sources.
•
Do not place hot foods in the refrigerator or freezer sections. Wait for foods and drinks to
cool to room temperature before placing them on the shelves;
•
Open the door(s) as infrequently and for as short a time as possible to prevent the
compartments from warming up too much;