English
Instructions for use
3
switching device, such as a timer, or connected to a circuit that is reg-
ularly switched on and off by the utility.
•
WARNING: This heater is not equipped with a device to control the
room temperature. Do not use this heater in small rooms when they
are occupied by persons not capable of leaving the room on their
own, unless constant supervision is provided.
Overview of the components
1. Handle
2. Power setting switch
3. Power light
4. Thermostat control
5. Support legs
Assembly of the heater
Before using the heater, the feet (supplied separately in the carton), must be fit-
ted to the unit. These are to be attached to the base of the heater using the 4
screws provided, taking care to ensure that they are located correctly in the bot-
tom ends of the heater side mouldings.
Where to locate the appliance
–
Position the heater on the floor at least 90cm away from the wall and any
other objects such as furniture, curtains or plants and under the coldest win-
dow in the room or wherever else you want.
–
The heater will reduce the effects of cold draughts to a minimum.
–
The appliance must not be positioned directly underneath a fixed power
point.
–
Do not use the appliance in rooms with a surface area of less than 4m².
Connection
The radiator must be connected to a perfectly functioning 220-240VAC socket.
Avoid contact between clothing, household linen, furniture, inflammable mate-
rial and the socket providing power to the radiator.
Summary of Contents for iHeat Plus HE-20T.002B
Page 2: ...1 4 5 2 3 ...
