English
Instructions for use
2
•
Do not leave the appliance unattended when it is in use, especially when there are children about.
•
Unplug the appliance from the mains supply when it is not in use and before cleaning it.
•
Make sure that the appliance is unplugged and cold before cleaning it.
•
Always unwind the mains cable fully to prevent it from overheating.
•
Do not let the cable hang over the edge of the table or work-top, nor let it come into contact with hot surfaces.
•
Never unplug it by tugging on the mains cable. Turn the knob to the “
OFF
” position and unplug the appliance from
the wall socket.
•
This appliance has been designed for domestic use only.
•
Do not switch the appliance ON (position 1~5) if either the cable or plug, are damaged or if it can be detected that
it is not operating correctly or if it has suffered any type of damage.
•
Cable repairs and replacements must be carried out exclusively by an Authorised Technical Service Centre.
Installation Instructions
•
Select a suitable location, close to an electrical wall socket but away from sources of heat.
•
The surface on which the appliance will stand should be heat-resistant, dry, and level and stable, and at a height
that allows it to be used safely. Do not place the appliance near the edge of the chosen work surface.
•
The appliance must be kept at least 10 centimetres away from the wall and any inflammables and explosives.
•
The hot plates are covered in a protective layer that will have to be removed before using the appliance. To do this,
set the temperature control to its maximum position for about 5 minutes
. It is important to keep the room well
ventilated when doing this, as the protective layer may begin to smoke as it heats up. This smoke is only given off this
once and is due to the protective wax coating, it will not happen again. When five minutes have elapsed, switch off
the electric hob, unplug it and leave it to cool. Wipe the hot plates clean with a damp cloth. The appliance is now
ready for use.
Summary of Contents for HP-01G.008A
Page 27: ......
