English
2
Instructions for use
Check if the voltage of the appliance corresponds to the main voltage of your home. Rated voltage: AC230V
50Hz. The socket must be at least 16A or 10 A slow-protected.
This appliance complies with all standards regarding electromagnetic fields (EMF). If handled properly and
according to the instructions in this user manual, the appliance is safe to use based on scientific evidence
available today.
Never move the appliance by pulling the cord and make sure the cord can not become entangled.
The use of accessories that are not recommended by the manufacturer can cause injuries and will invalidate any
warranty that you may have.
Allow the appliance to cool down before you clean or store it.
To protect yourself against an electric shock, do not immerse the cord, plug or thermostat control in the water or
any other liquid.
Do not use this appliance with a damaged cord or plug or when the appliance has malfunctions, or has been
damaged in any manner. To avoid a hazard make sure that a damaged cord or plug will be replaced by a
competent qualified repair service. Do not repair this appliance yourself.
Unplug the appliance from the socket when you are not using it.
Allow the device to cool down before you are going to remove or replace spare parts.
Do not use this appliance near direct heat sources.
Make sure the cord does not touch the hot parts of the appliance.
We advise to place a heat resistant coating between your table and the appliance (this way you don't get burns
on your table or table cloth).
Do not use this appliance in the bathroom or near a sink filled with water. If this appliance has fallen into the
water do not under no circumstances directly grab this appliance, but first pull the plug from the socket.
Make sure that the cord is not hanging over the edge of the table or counter, does not touch any hot surfaces or
is coming directly into contact with the hot parts of the appliance. Do not place the appliance underneath or
close to curtains, window coverings etc.
