hadewe Veloria, Manual

Page: 19 / 28

19
Maintance & Care
Working with high pressure
will not improve the out-
come of your work, since
the motor will even be slowed
down. A second disadvantage is the
stronger impact on the ball bearings
and the motor, which will shorten
their life span in the long run.
In case of sending the de-
vice by mail remove the dust
filter before.
Only suck up dust or milling
waste, never suck up larger
particles such as small bits
of cotton wool as this may be get
caught in the handpiece and lead to
blockages.
Always working with maxi-
mum speed might have a
similar effect. Please make
sure that the speed setting you use
is according to the work you are
doing and the instruments you are
working with.