4
Safety Instructions
The equipment should only be used by trained
operators.
The installation of the working area has to cor-
respond to the relevant regulations. Set up the
unit in such a way, that the air slits are not
blocked and the extracted air can escape well.
To avoid the risk of electrocution only connect
the device to the mains power supply.
If you pull the power plug, it will stop the con-
nection to the mains power supply. Set up the
unit so that the power plug is always accessi-
ble. The power switch should also always be
easily accessible.
Only switch on the unit if the handpiece rests
secured in the handpiece holder, or if you hold
it safely in your hand.
Prevent any liquids from entering into the
control unit, since this could damage the
electronic elements. Clean the outside of the
box only with a damped cloth. Make sure, that
you have unplugged the unit before.
Only when pulling the mains cable, you can
ensure that the device will be completely dis-
connected from mains. Check the mains cable
regularly for damages and in case of such,
have it changed or repaired by an authorized
service center.
