4
Safety Instructions
The installation of the working area has to cor-
respond to the relevant regulations. Set up the
unit in such a way, that the air slits are not
blocked and the extracted air can escape well.
To avoid the risk of electrocution only connect
the device to the mains power supply. If you
pull the power plug, it will stop the connection
to the mains power supply. Set up the unit so
that the power plug is always accessible. The
power switch should also always be easily ac-
cessible.
Only switch on the unit if the handpiece rests
secured in the handpiece holder or if you hold
it safely in your hand.
Prevent any liquids from entering into the con-
trol unit, since this could damage the electronic
elements. Clean the outside of the box only
with a damped cloth. Make sure, that you have
unplugged the unit before.
Only when pulling the mains cable, you can
ensure that the device will be completely dis-
connected from mains. Check the mains cable
regularly for damages and in case of such,
have it changed or repaired by an authorized
service center.
