14
Application
Insert the bur
Insert the bur until it stops. The
hand piece is equipped with a
chuck which can hold all burs with a
diameter of 2.35 mm (confirm to
ISO 104).
Only change the tool if the
hand piece is turned off.
Adjusting the speed
Put the hand piece back in the hand
piece holder or keep it in your hand.
Switch on the unit with switch (8).
Now you can adjust the requested
speed with the switch (3) and (4).
Choose the direction with switch
(6).
Memory buttons m1, m2
Frequently used speed levels can
be saved. Therefore, two memory
buttons are available. At first,
choose your speed level and then
save it by pushing button m1 for 4
seconds. To recall the above speed
level simply press button m1 again.
Further speeds can be saved with
m2.
Spray
Turn on the spray function while
pushing switch (2). Now the spray
system will be filled automatically
and a strong spray stream will be
blowed out of the hand piece for the
first 15 sec. Then you can adjust
the requested spray stream while
turning knob (1).
When turning off the unit or the
spray function, the spray liquid is
pumped back completely into the
tank from the hoses. With this pro-
cess, a bubbling can be heard in
the tank.
Drying / changing tool
Press key (7) and the hand piece
and spray will be turned off. Now
only air will come out of the top of
the hand piece, which you can use
to dry the spot of the recent treat-
ment. When you push button (7)
again, the spray and hand piece are
working again.
This function can also be used
to change your tools while the
hand piece is not running.
