5
Use
Cleaning & Disinfection
After
every
treatment
please
carry
out the
following steps:
•
Remove the rotating tool
first. Then handle the tool
according to the instructions
of its manufacturer.
•
Remove tissue remains by
wiping off the unit with a
mildly
moistened
paper
cloth. Afterwards clean all
surfaces with disinfection
cloth
(e.g.
Mikrozid
AF
Tücher of Schülke and Mayr)
There is no limit to the
number of times this device
can
be
cleaned
and
disinfected
during
its
recommended lifespan.
Area of Application
The massaging scrubber allows
a variety of treatments and
cleaning of the face. The
handpiece can hold all hadewe
brush
attachments.
Brush
attachments
from
other
manufacturers can be used by
using an adapter.
Installation Site
The working area must conform
to the conditions described. Set
up the unit in such a way, that
the air slits are not blocked and
the extracted air can escape
well. The device must only be
used in closed spaces.
Dismantle handpiece handle
Optionally, the handle can be
disassembled
from
the
handpiece. To do this, remove
the cap at the end of the handle.
Loosen the screw inside with the
hexagon key until the handle
can be removed. The threaded
hole on the handpiece is now
closed with the stopper.
Start & Operation
1. Switch off the device at the
knob.
2. Insert the brush attachment
into the handpiece until it
clicks into place.
3. Plug in mains plug.
4. By turning up the knob, you
switch on the device and set
the speed.
Always
place
the
handpiece with the tip
pointing down to avoid residual
fluid flowing from the brush into
the handpiece.