BURST STEAM
This function provides extra steam to remove very stubborn creases.
1.
Set the temperature dial to the MAX position and wait until
the temperature light has gone out.
2.
Press the Burst of steam button to produce extra steam. Wait
a few seconds for the steam to penetrate the material before
pressing again. For the best steam quality, do not use more
than three successive bursts each time.
3.
Excessive use of this feature will cause the iron to cool, wait
at least 1 minute before using this function again to prevent
water from dripping out of the sole-plate. Always ensure that
you consider the temperature setting for the type of fabric
being ironed. To prevent water leaking from the soleplate, do
not keep the steam control button depressed for more than 5
seconds.
CLEANING
•
Before cleaning remove the mains plug from the wall socket
and allow the iron to cool down sufficiently.
•
Scale and other residue can be wiped off the soleplate with a
damp cloth and some non-scratching proprietary cleaner.
STORAGE
•
Before storing remove the mains plug from the wall socket
and allow the iron to cool down sufficiently.
•
Pour any remaining water out of the water reservoir, taking
care to avoid splashing as the water may still hot.
•
Set the steam lever to the no steam position.
•
Stand the iron upright before storage.
Summary of Contents for 198136
Page 1: ...Product Code 198136 STEAM IRON INSTRUCTION MANUAL ...
Page 12: ......
