5.52.248.00.01.02
7
It is not permitted to use the unit in an area at risk from explosion!
4.2 Design
HADEF wire rope winches for stationary use are fitted with holes for installation. The housing if made of
stainless steel. The crank is detachable.
Type 190/94 is additionally fitted with fast drum movement and drum disengagement mechanism.
The winch can be installed in any position desired, make sure, however, the wire rope exit is correct.
For outside use we recommend to use a protective roof.
190/94
192/98
4.2.1
Wire rope exit
The wire rope exit direction must be made as
prescribed.
4.3 Functions
The load is lifted/ lowered, by turning the winch handle. The incorporated load-pressure-brake prevents
automatic lowering of the load after release of the winch handle. Little after run of the load or turn of the
winch handle is due to the system and not a mistake.
4.4 Important
components
Housing
Made of stainless steel
Brake
Load pressure brake
Gear
Spur gear
Overdrive only for Type 190/94
Changing from load to overdrive by putting the crank on the other driving shaft
Drum clutch only by Type 190/94
For easier pull off of the unloaded wire rope
