2
Note:
In early versions of “The Ranch-‐O”, the glass may be held in by the
mounting flange of the lighting socket and a brass nut on the right hand stud and
a single retaining clip on the left hand stud. (See Figure 3)
With the retaining clips removed, lift the diorama side of the clock above the
work surface high enough to place your hand under the glass. Gently push the top
edge of the glass upward and remove it with your other hand. After the clock case
has been thoroughly cleaned, the glass (if damaged) may be replaced with new
glass or the original glass may be cleaned and reinstalled.
Tip #3:
Be sure to remove all fingerprints from the inside of the glass before
reinstalling the horse and rider assembly and the diorama background.
Figure 3: Early “The Ranch-‐O” Example
Locations
Figure 4: Push the Top Edge of the Glass
Upward
