Hach TitraLab, User Manual

Page: 21 / 38

21
Section 4 Operation
4.1 Switch on the instrument
Become familiar with the instrument functions before operation. Learn how to navigate
through the menu and perform the relevant functions.
1. Connect the input connector of the power supply to the
POWER IN
port on the back of
the TitraLab.
2. Connect the power supply to a power socket.
3. Press
ON/OFF
below the display to switch on the instrument.
4. The instrument performs a self-test upon each activation.
Note: Wait approximately 20 seconds before switching on again so as not to damage the electronics
and mechanics of the instrument
Figure 12 Switch on the instrument
4.2 Startup
4.2.1 Language and data output setting
The titrator software supports multiple languages. The first time the instrument is switched
on, a language selection list is displayed automatically upon completion of the self-test.
1. Select the required language.
2. Press
OK
to confirm the selection.
3. Select the type of data output (deactivated, printer, computer) and confirm with
OK
.