Hach sension1, Instruction Manual, Page: 18 / 40

18
SECTION 1,
continued
1.4 Audible Signals
The meter will beep under certain conditions:
•
when a non-functional key press is made (one beep)
•
when display lock is enabled and measurement stability is
reached in reading mode (three beeps)
•
any time measurement stability is reached during calibration
mode, regardless of the Display Lock setting
•
to signal an error condition.
31 When on or flashing, Stabilizing... indicates signal from sample is not yet stable. When it
disappears, the reading is stable and may be recorded.
32 Used with ? icon. Asks if user wants to store the displayed sample data or the calibration
that has been just completed.
33 (NA) Used with large display to indicate the time is being set.
34 (NA) Indicates meter is in recall mode and the data displayed is stored data.
Table 2 Main Display Elements (Continued)
Item No. Description