Hach sensION MM340, Manual

Page: 8 / 24

INSTRUMENT CONDITIONS
SN:70602 V1.0
Monday 30 July 2010 15:50
------------------------------------------------------------------------
CHANNEL 1
Units...........................................................................................pH
Resolution.............................................................................0.01
Measurement..........................................................By stability
Criteria...........................................................................standard
Type of calibration ....................................Technical buffers
Frequency of calibration.....................................every 24 h.
CHANNEL 2
Units...........................................................................................ISE
Measurement..........................................................By stability
Criteria...........................................................................standard
Curve number...................................................................... 1, F-
Uniits measurement........................................................mol/l
Standard 1......................................................................0.00001
Standard 2........................................................................0.0001
Standard 3...........................................................................0.001
Standard 4.............................................................................0.01
Standard 5.............................................................................. 0.1
SYSTEM
Stirrer number 2.................................................................. non
Codification............................................................. automatic
Data send .........................................................................printer
Type of printeri.............................................................thermal
Type of report..............................................................reduced
Samples by report........................................................ several
Readjust temperature.........................................................NO
------------------------------------------------------------------------
ELECTRODE HISTORY Channel 1
SN:70602 V1.0
Monday 30 July 2010 15:50
------------------------------------------------------------------------
Installed :
01-03-07 15:39:32
In service: 06:30
Number of measurements: 216
Maximum value Minimum value
pH 13.75 1.15
mV -- --
T (˚C) 38.2 14.3
------------------------------------------------------------------------
MEASUREMENT DATA Channel 1
SN:70602 V1.0
Monday 30 July 2010 15:50
Sample pH ˚C Time St%
----------- ---------- --------- ---------- -------
15-03-07 14:36
38510
10.15 23.5 00:15 30
15-03-07 14:40
38511
9,85 23.2 00:22 30
15-03-07 14:46
38512
10.23 22.8 00:18 30
16-03-07 08:36
Pozo1
7.48 23.1 00:25 30
------------------------------------------------------------------------
pH CALIBRATION DATA Channel 1
SN:70602 V1.0
Monday 30 July 2010 15:50
------------------------------------------------------------------------
CALIBRATED 29-07-2010 15:42:51 22.5˚C
Buffers
Slope Sens P.Asym. Time
Technical mV/pH % mV s
----------- ---------- ----- ---------- ----------
4.01,7.00 58.16 99.0 -1.5 18
7.00,9.21 57.91 98.5 -1.5
Stirring 30%
Calibration frequency, every 24 h
------------------------------------------------------------------------
SYSTEM
10-04-2010 17:15
ISE MEASURE
10-04-2010 17:15
ISE CALIBRATION
10-04-2010 17:15
DATA LOGGER
10-04-2010 17:15
DATA LOGGER
10-04-2010 17:15
...
Start pH measurement
Channel 1
...by stability
Resolution: 0.01
Meas.: stability
View mV
Limits: no
Isopotential: pH 7
Measurement condit.
Technical buffers
DIN 19266 buffers
User buffers
To a X value
Data introduction
Theoretical cal.
Cal. frequency
Calibration pH
...
Start calibration
Channel 1
Technical bufferes
Consult
Print
Erase
DATA LOGGER C1
...
Start measurement ISE
Channel 2
...curve 1
Curve no: 1
N. of decimals: 6
Measure: stability
Start ISE measurement
Measurement condit.
Curve: 1
Units: mol/l
Name of Ion: F-
Standards: 5
1: 0.000010 mol/l
Factory settings
ISE Calibration
...
Start calibration
Channel 2
Curve 1
Consult
Print
Erase
Measurement units
Sample ID
Data output
Type of report
Users
DATA LOGGER C2
SYSTEM
Header
Identify sensor
Stirrer 2
Date / Time
Language
Display contrast
Readjust temp.
Stirring
Temperature units
Channel 1 Channel 2
Channel 2
Channel 2
Channel 1
pH CALIBRATION
Channel 1
10-04-2010 17:15
pH MEASURE
New CAL in 12 h
10-04-2010 17:15
Technical Buffers
Use first buffer
Continue...
CALIBRATING pH
Technical Buffers
Use second buffer
Continue...
CALIBRATING pH
Technical Buffers
Use third buffer
Continue...
CALIBRATING pH
...
Start calibration
Channel 1
Technical buffers
1st buffer OK
pH 7.01 23˚C
00:30
CALIBRATING
1st buffer
pH 7.15 25˚C
00:23
CALIBRATING
1st buffer
pH 7.15 25˚C
Stirring 23% 00:23
CALIBRATING
2nd buffer
pH 4.12 23˚C
00:20
2nd buffer OK
pH 4.01 23˚C
00:26
Channel 1
pH CALIBRATION
10-04-2010 17:15
CALIBRATING
1st buffer
pH 7.15 25˚C
00:23
4. Operation
Example of report
Notes:
1. Channel 1 and Channel 2 can measure pH, mV or ISE with no difference .
Measuring units can be selected in System , seer page 17 .
2. The system configuration, sample codification, data output, type of report,
etc, are common parameters for the two channels .
3. Data Logger . The measurements will be stored in the Data Logger of the
corresponding channel .
4.4. General diagram
This is a general view over the way to access to all possibilities of the instrument:
7
ENGLISH
Note:
The
sign on the
display indicates flashing.
Channel 1 Channel 2