Hach RTC101, Basic User Manual, Page: 20 / 504

5. Push Add to add more sensors from the list.
Selected sensors show in gray. Refer to Figure 5 on page 20 to set the sensor sequence. Refer
to Figure 6 on page 21 to remove a sensor.
6. Push Enter to accept the list.
Figure 4 Add sensors
1 Select sensor 4 Add
2 Accept 5 Select additional sensor
3 Sensor list
Sort the sensors (RTC modules only)
The sensor sequence is programmed in the RTC module for the measurement values. To sort the
sensors in the order specified for the RTC module, move the selected sensor with the UP and
DOWN arrows. Refer to
Figure 5 .
Figure 5 Sort the sensors
1 Select sensor 2 UP and DOWN arrows
Delete a sensor from the list
To delete a selected sensor from the list, push Delete . Refer to Figure 6 .
20 English