Figure 5 Delete a sensor
1
Select sensor
3
Delete the sensor
2
Go back without changes
RTC input and output variables values
All input and output signals are connected to the sc1000 controller or directly to the RTC module.
Refer to the RTC module and the sc1000 documentation.
Refer to
and
for the RTC101 P-module measurement values.
,
for the RTC105 N/DN-module measurement values.
and
for the RTC113 ST-module and RTC112 SD-module measurement
values.
Refer to
for the RTC103 N-module measurement values.
for the RTC111 SRT-module measurement values.
Table 2 RTC101 P-module (1-channel)
Tag name
Parameter Unit
Channel Description
RTC input
PO
4
-P
mg/L 1
Phosphate
RTC input
Flow rate
L/s
1
Supply volume flow
MEASUREMENT 1 Q 1
L/s
1
Wastewater flow rate
ACTUAT VAR 2
Pdos 1
L/h
1
Set point precipitant dosing volume
ACTUAT VAR 3
Digi 1
—
1
Digital output for pulsed pump operation (ON/OFF)
ACTUAT VAR 4
Preg 1
L/h
1
Internal calculation variable for precipitant volume
ACTUAT VAR 5
ß' 1
—
1
Only with open loop: ß' otherwise internal calculation
variable.
ACTUAT VAR 6
Qras 1
L/s
1
Return sludge volume
Table 3 RTC101 P-module (2-channels)
Tag name
Parameter Unit
Channel Description
RTC input
PO
4
-P
mg/L 1
Phosphate 1
RTC input
PO
4
-P
mg/L 2
Phosphate 2
RTC input
Flow rate
L/s
1
Supply volume flow 1
RTC input
Flow rate
L/s
2
Supply volume flow 2
English
9
Summary of Contents for RTC
Page 335: ......
