Hach MP DataLink User Manual Download Page 7

Page: 7 / 48

Section 2

MP DataLink installation

Perform the following steps to install the MP DataLink computer interface.

2.1 Uninstall previous versions

If applicable, uninstall previous versions of the software before this version is

installed.

Note:

Save all work and exit all applications prior to the installation of this software.

2.1.1 Windows users

Click

Start

Select

Control Panel

Select

Add or Remove Programs

Scroll to the MP-Dock application.

Click

Remove

. There is no need to restart the computer.

2.1.2 Mac OS X users

Select

in the Finder menu bar.

Select

Applications

Scroll to the MP DataLink folder.

Drag the folder to the trash.

2.2 Windows installation

Note:

Install the MP DataLink software before the MP-Dock is connected to the computer.

Make sure to uninstall any previous versions of the software before the installation

is performed (see

section 2.1

Note:

Installation and use of MP DataLink requires user acceptance of the End User License

Agreement (EULA).

2.2.1 Install the executable and support files

Place the MP DataLink software CD into the CD drive or download the MP

DataLink application from www.hach.com.

If Auto install does not start, go to

Start

My Computer

MP DataLink

Double-click the

MP DataLink

icon under Devices with Removable Storage.

Summary of Contents for MP DataLink
















































Search results

Summary of Contents for MP DataLink

Reviews:

Related manuals for MP DataLink

Brands by name

Popular brands

Hach MP DataLink, User Manual

Search results

Summary of Contents for MP DataLink

Reviews:

Related manuals for MP DataLink

Brands by name

Popular brands