10.
Remove the USB flash drive after a minimum of 30 seconds.
Note: If the installation is successful, the configuration file is deleted from the USB flash drive.
Figure 2 Remove the cover from the USB box
Connect the modem
Connect the modem to the controller.
Note: Make sure that the controller is energized for a minimum of 5 minutes to complete the start process. Then connect the
modem to the controller.
Items to collect:
•
SIM card
•
Modem
1.
.
2.
Connect the modem to the USB port in the USB box. Refer to
.
3.
Make sure that the modem is energized and the LINK LED flashes.
4.
Wait a minimum of 5 minutes.
5.
If the signal strength indicator of the modem does not shows two or more bars, move the USB box to a
location with a stronger 3G signal. Refer to the SC1500 controller documentation.
6.
Make sure that the LINK LED flashes every 5 seconds to show that the modem is connected to the network.
7.
Install the cover on the USB box. Refer to
Figure 3 Install the SIM card
2