Hach Lange ORBISPHERE 3100 User Manual Download Page 20 | Manualshive

Page: 20 / 47

Hach Lange ORBISPHERE 3100 User Manual Download Page 20

18

Installation

3.9 PC software installation

The instrument is delivered with default user and measurement configuration tables. However,
to personalize the instrument by setting up your own tables you will need to use the PC software
which is included on the USB key supplied with the tool kit.

Install the PC software by inserting the USB key into your PC and running the setup program
(entitled

setup.exe

) from the directory

Orbisphere 3100\Installation Files\PC Software

on the

USB drive. Follow the on-screen instructions and the software will be installed on your hard disk
in a new directory:

C:\Program Files\Hach Lange\3100 PC Software\

.

Note:

The PC software is compatible with the Windows 7, Vista, and XP operating systems.

Once the software has been installed, click on the desktop icon on the PC to launch the
application.

You will then be able to:

•

Create or modify User Tables and Measurement Configuration Tables.

•

Print any of the tables.

On completion, a program icon will have been installed on your desktop for
easy access to the application.

«
...
18
19
20
21
22
...
»

Summary of Contents for Lange ORBISPHERE 3100
















































Reviews:

No comments