Figure 6 Attach a sensor to the logger
Figure 7 Attach a sensor to an external module
Attach an external module
An external module must be used as an interface between some sensor types and the logger. The
external module is mounted on the side of the logger (
on page 13). Refer to the
documentation that is supplied with the module for mounting instructions.
Attach a sampler
The logger can attach to a Sigma 900 Standard, Sigma 900 Max, Hach SD900 or Hach
AS950 sampler for flow-paced and set point sampling. Connect the AUX port on the logger to the
English
13
