manualshive.com logo in svg

Hach DR 6000, User Manual

Share
Download
Hach DR 6000 User Manual Download Page 129

129

Expanded programs

6.7.8

Lamps operating time

The "Lamp History" menu provides the following information:

•

Total operating hours of lamp.

•

Number of activation and burn cycles of lamp.

•

Number of ignition attempts of UV lamp (triggers).

After a lamp change the display of the overall operating time is 
reset to 0 in the "Lamp History" menu.

1.

Press 

Lamp History

 in the "System Checks" menu.

2.

To reset the data for the halogen lamp (VIS visible), tap on 

Reset VIS

. The data for the visible lamp is reset to 0.

To reset the data for the deuterium lamp (UV), tap on 

Reset 

UV

. Data relating to the UV lamp is reset to 0.

3.

Press 

OK

 to return to the "System Check" menu.

6.8

Toolbar

The right of the display contains a toolbar with various programs. 
Many of these programs can also be called up via a menu but the 
operation is the same.

6.8.1

Log on

Use this function to enter up to 30 different operator initials (each 
with a maximum of 10 characters) into the instrument. This 
feature helps record which operator measured each sample. For 
a detailed description, refer to 

section 5.2, page 27

.

Summary of Contents for DR 6000





























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands