Hach DR 6000 User Manual Download Page 27

Page: 27 / 156

Standard programs

5.2

Instrument Setup

Select

Instrument Setup

in the Main Menu.

A selection of functions appears in order to configure the
functions of the instrument.

5.2.1

Operator ID

Use this option to enter up to 30 sets of operator initials (up to ten
characters each) into the instrument. This feature helps record
which operator measured each sample.

Press

Operator ID

in "Instrument Setup".

Press

Options > New

to enter a new operator ID.

Note: If no operator ID has yet been entered, the alphanumeric
keyboard is immediately displayed.

Use the alphanumeric keypad to enter a new operator ID.

Press

to confirm the entry.

Choose an icon for the operator ID using the

Left Arrow

and

Right Arrow

Press

Operator Password

to protect the operator ID with a

password.

Use the alphanumeric keypad to enter an operator
password.

Press

to confirm the entry.

Press

Cancel

to delete the complete entry for the operator

ID.
With

Back

you go back into the input display for the

operator ID.
Press

to confirm the entry.

Summary of Contents for DR 6000




























































































































































Search results

Summary of Contents for DR 6000

Reviews:

Brands by name

Popular brands

Hach DR 6000, User Manual

Search results

Summary of Contents for DR 6000

Reviews:

Brands by name

Popular brands