65
SECTION 4,
continued
11.
Adjust the scattered light amplifier output by inserting a small
flat-bladed screwdriver into the trimpot hole (located on bottom).
Adjust the display to read 2.5 ± 0.3 volts (2.0 volts for models that
display
2100
when turned on).
12.
Press
I/O
to exit gain adjust mode.
13.
Perform a formazin calibration according to
Section 3.6.3
on
page
44
or
Section 3.6.3.1
on page
48
.
