Specification
Details
Calibration options
StablCal
®
: at 20 NTU from 0 to 40 NTU; at 20 NTU and 600 NTU for full
range
User prepared formazin: at 20 NTU from 0 to 40 NTU; at 20 NTU and 600
NTU for full range
Custom calibration for up to 6-point calibrations
Verification options
Liquid: StablCal
®
, formazin (0.1 to 40 NTU)
Dry: factory-set values of 1.0 ± 25% NTU
Verification (Link2SC software)
Verfication of the measurement value to compare values to a laboratory
instrument via Link2sc software
Dimensions (W x D x H)
268 x 249 x 190 mm (10.6 x 9.8 x 7.5 in.)
Enclosure
Rating: NEMA/IP65 for functional units
Material: ASA Luran S 777K / RAL7000, TPE RESIN Elastocon
®
STK40,
Thermoplastic Elastomer TPS-SEBS (60 Shore)
Display resolution
0.0001 NTU (0.0001 to 0.9999/1.000 to 9.999/10.00 to 99.99/100.0 to
700 NTU)
Default=TU5300sc: 0.001 NTU, TU5400sc: 0.0001 NTU
Sensor cable length
1.6 m (5.25 ft), extendable up to 50 m (164 ft) for instrument without
accessories
Fittings
Sample quick connector: ¼-in. for ¼-in. tubing
Tubing
Materials: Polyethylene, polyamide or polyurethane tubing, calibrated outside
diameter ¼ in. +0.001 / –0.004 in. or +0.03 mm / –0.1 mm
Weight
???
Installation environment
Indoor or outdoor with cover
Mounting
Wall
Protection class
III
Pollution degree/installation
category
2, II
Power requirements
12 VDC, 14 VA from the sc controller. Refer to the controller documentation
for the controller power requirements.
Operating temperature
0 to 50 °C (32 to 122 °F)
Storage temperature
–40 to 60 °C (–40 to 140 °F)
Operating humidity
Relative humidity: 5 to 95% at different temperatures, non-condensing
Certifications
CE compliant; US FDA accession number: 1420493-xxx. This product
complies with IEC/EN 60825-1 and to 21 CFR 1040.10 in accordance with
Laser Notice No. 50.
Warranty
1 year (EU: 2 years)
General information
In no event will the manufacturer be liable for direct, indirect, special, incidental or consequential
damages resulting from any defect or omission in this manual. The manufacturer reserves the right to
make changes in this manual and the products it describes at any time, without notice or obligation.
Revised editions are found on the manufacturer’s website.
4
English
-BETA DRAFT-
BETA