HACH-LANGE, Willstätter Str. 11, D-40549 Düsseldorf, Germany
Telephone: +49 (0)211/5288-0; FAX: +49 (0)211/5288-143
sc1000 Software Updates from SD Card
Table of Contents
Table of Contents ___________________________________________________________________ 1
The sc1000 SD Card Connector/Slot _____________________________________________________ 1
Software Update of sc1000 Display module (LXV402) _______________________________________ 4
The sc1000 SD Card Connector/Slot
The sc1000 SD Card Connector is used to connect
MMC cards up to 1GB,
SD cards up to 1GB,
SD cards of 2GB
(1)
,
SD cards compliantwith the SDHC standard (4 – 32GB)
(1)
,
Note (1):
Cards with capacities of ≥ 2GB can only be connected, when sc1000 software v3.20 or higher
is running
Functionality of the SD Card Connector/Slot
Update the sc1000 system: All components of the sc1000 controller system and all connected
sc sensors can get software updates by uploading new software versions from the card to the
instruments.
Saving and restoring configuration and settings of devices, which are connected to the sc1000
controller. Device data is stored to the card. This data can later be sent back to the devices, to
restore the saved status.
Note: Restoring settings and configuration does not restore the content of data and event log.
Storing diagnostics data for a detailed analysis of error conditions by Service.
Getting (one time action) and logging (continuous action) of Data and Event log files from the
connected devices. The files are in <.csv> -format and can be imported to Excel to create
curves or to explore the data in detail.
How to get access to the sc1000 using the SD Card Connector/Slot
Required hardware:
Storage card with a size of 1GB or less for sc1000 Display software version 3.12 or lower.
MMC Adapter (part no. YAB 902) for old
(2)
sc1000 Display Modules. This package already
contains a 1GB SD card.
