HACH LANGE ORBISPHERE 6110, User Manual

Page: 33 / 76

31
User Interface and Startup
4.2.2 User identification and access level
If access rights have been enabled, it will be necessary to log on as an authorized user to get
access to the instrument functionalities and settings (see
Security and user management on
page 38 to set these up).
By default, three levels of user have been defined for the instrument, and will be required on first
access to the instrument:
After setting up your own user list, these three default entries should be removed.
First press
Login
at the bottom of the screen to access the full login screen:
Enter your identification and password in the boxes provided, and press
Ok
to continue. Your
details will be displayed at the top left corner of the screen. Then press the
Ok
button at the
bottom left of the screen to gain access to the main menu.
There are three user access levels:
For security purposes, when the session inactivity delay period has expired (adjustable using
the option
Security and user management on page 38 ), the user is logged off automatically.
Name First name ID Password Level
Administrator Administrator 000 123 Administrator
Manager Manager 001 123 Manager
Operator Operator 002 123 Operator
Level Available options
Administrator Configuration, Calibration, Measurement, Analysis and Maintenance
Manager Configuration, Measurement, Analysis and Maintenance
Operator Measurement and Analysis