
IV. HEIGHT ADJUSTMENT
V. LAYING THE PATIENT
The patient sits at the table side onto the upholstered top and adopts a comfortable horizontal
position. The above-mentioned activities are safeguarded by the massage therapist, who
determines the correct position of the table for the patient, and after finished tratment helps
them to get down safely from the table.
VI. CLEANING AND DISINFECTION
Wood, plywood. Surfaces made of wood or plywood should be cleaned by means of soft damp
cloth wiping them until dry. No chemical agents should be used. Notice! Wood as a natural raw
material may have differences in the tree ring layout, differences in the shades as well as
natural inserts like: streaks, dots. Such properties do not constitute a basis for a complaint.
Disinfect if necessary and occassionally.
VII. EXPLOITATION REMARKS
1. The couch is intended for use inside dry and closed rooms for the treatment of one
person only at a time.
2. It is unacceptable to shift the table along with a patient on it.
3. It is forbidden to jump on the couch.
5. It is forbidden to sit down, kneel and lean on the headrest.
7. The couch should be used and stored away from direct sources of fire and heat.
8. Proper use of the couch will ensure long and failure-free exploitation.
9. Damages caused by wrong using (inconsistent with the above mentioned remarks) cannot
be complained.
10. Use the couch in accordance with the instruction manual.
11. Read the warranty terms and conditions and follow them.
12. Only afer meetng the above recommendations there are no contraindications to use the
product.
13. Each serious incident related to the device should be reported to the manufacturer and the
competent authority of the Member State in which the user and/or patient is established.
1
2
3
Description of activities
1. Remove the caps.
2. Remove the moving leg from the mounting
bolt, move it to the desired position.
3. Tighten the caps.
10